Skip to main content ↑ ↓

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: SACD iso playback error (0x80070057) (Read 5518 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

SACD iso playback error (0x80070057)

Hi

I installed the latest foo_input_sacd-0.7.3 on windows 7 64 bit which is straightforward and nothing complicated.
My installation path is C:\Program Files (x86)\foobar2000\components.
When I check components list I find Super Audio CD Decoder Input PlugIn foo_input_sacd.

When trying to open (file-open) sacd iso I get the following error:
Unrecoverable playback error: Parametr jest niepoprawny.  (0x80070057) ("Parametr jest niepoprawny" means parameter is incorrect).

I was trying to install this many times but although the decoder is enlisted in components list it still doesn't play iso sacd (tried various iso images).

Please help how to verify the installation is correct and help resolving playback issue.
I don't find any *.dll refering to sacd playback file in components list after installation, there is no foo_input_sacd.dll anywhere in foobar2000 folder maybe this is the reason?

thx for your support

SACD iso playback error (0x80070057)

Reply #1 –
I'm just guessing (I'm not at my DAC so I can't run tests.)
If you see foo_input_sacd in your components list you probably did install foo_input_sacd properly, tho you might not have configured it.  You didn't mention foo_dsd_asio.  It is also in the foo_input_sacd package and (if needed) needs to be separately installed.  If your DAC doesn't support DSD you'll need to configure foo_input_sacd to convert DSD to PCM, if your DAC supports DSD but only thru DoP you'll need to use foo_dsd_asio to wrap the output DSD into DoP.  That error sounds like you haven't configured foo_input_sacd or foo_dsd_asio properly or that your DAC doesn't support DSD and you haven't configured foo_input_sacd to convert DSD to PCM.

SACD iso playback error (0x80070057)

Reply #3 –
Quote from: tedsmith on
If you see foo_input_sacd in your components list you probably did install foo_input_sacd properly, tho you might not have configured it.  You didn't mention foo_dsd_asio.  It is also in the foo_input_sacd package and (if needed) needs to be separately installed.  If your DAC doesn't support DSD you'll need to configure foo_input_sacd to convert DSD to PCM, if your DAC supports DSD but only thru DoP you'll need to use foo_dsd_asio to wrap the output DSD into DoP.  That error sounds like you haven't configured foo_input_sacd or foo_dsd_asio properly or that your DAC doesn't support DSD and you haven't configured foo_input_sacd to convert DSD to PCM.



I don't send data to any DAC just using foobar to send the stream to the sound card on msi z87 mpower motherboard.
I configured foo_input_sacd like this:


Components window:



Error message when opening iso sacd:



thx for your time

SACD iso playback error (0x80070057)

Reply #4 –
You are asking the sound card to use a 352.8kHz sample rate, are you sure your sound card supports that sample rate?  You might try 88.2kHz or 176.4kHz.

SACD iso playback error (0x80070057)

Reply #5 –
DirectSound usually support samplerates from 100 Hz to 200 000 Hz.

SACD iso playback error (0x80070057)

Reply #7 –
Quote from: tedsmith on
You are asking the sound card to use a 352.8kHz sample rate, are you sure your sound card supports that sample rate?  You might try 88.2kHz or 176.4kHz.


Good point! I tried with the highest setting first and it worked when I changed to 176.4kHz.

Problem solved!

thx all for your support